HXL-YX2D-9585Z
Outline
1. This equipment is TP, black and white LCD, TFT, 3D lens high-precsion glass substratecuting special equipment, this equipment has a high degree of automatin, with automatic CCD alignment, automatic cutting, automatic finding cutting zero and adjust the cutting
depth according to the stting; The cutting motion is stable, the vibration is small the speed is high; Can achieve square, rectangular, circular, iregular graphics ctting. The
equipment adopts industral computer as the main control system, which has strong anti-interference ability and low filure rate.
2. Visual automatic algnment system, automatic tool depth (tool adjustment) device,atomatically change the pressure of each cuting line according to the stting.
3. The arangement of the cuting line should fol low.
①The spacing between the ctting line and the ctting line should be greater than 2 to 3 times the thickness of the cut glass.
②The Angle between the tangent lines is preferably 90土15 degrees.
③Concave cuting to leave a good gass fragment exit open space, generally need to be more than 30° open.
④Convex radius thickness below 0.5mm R≥3mm, thickness above 0.5mm R≥5mm,products that meet these conditions wil get good results.s
4. The cutting position, conditions, MAKE of the algnment and cuting pressure of the glass can be read and saved.
5. Program input: CAD graphics import. The graphics are stored in the computer hard disk,and can be imported through the network cable or USB interface (CAD graphics file dataimport, the company only als CAD DXF format fles; CAD design software and editing
require user professionals to complete)
Equipment composition
The machine is composed of high precision mechanical workpiece and natural marble,electrical control system, optical system, gas path system and independent software system.
Double knife special- shaped glass cutting machine parameters
Name | Model number | Length*width*height |
Double knife special-shaped glass cutting machine | HXL-YX2D-9585Z | 1900mm*1600mm*1400mm |
Table height | Power | Approximate weight |
900mm±50mm | AC 220V，Monophase)，50/60Hz，4.5KW | 2.2T |
Technical characteristics of machine
Maximum glass size | Cutting control | And tool head synchronization |
950*850mm | The motor drive accurately controls the | The CCD follows the tool head to monitor the |
X direction (tool holder straightness) | Flatness of the platform(mm) | Cutting thickness of veneer (mm) |
±15μm | ≤±0.025 | 0.15-1.1mm |
Precision of cutting glass | Carrier moving mode | Cutter holder |
Straight line±0.03 | Linear servomotor | Four |
Tool wheel lifting and depth control | Tool wheel specification D*T*H(mm) | Tool wheel travel setting |
Servo motor, screw | 2.0X0.8X0.65 | Settable |
Tool origin detection | Depth of cut(mm) | Cutting mode |
Auto | 0.005-0.300 | Motor+ball guide screw |
Data import mode | Tool depth setting | Pressure setting |
CAD direct import | Each knife can be set | Each knife can be set |
Characteristics and origin of key components
Air cylinder | SMC | Japan |
Control computer | Industrial computer | China |
The tool head drives the motor | Servo motor | Japan |
Y platform, X tool holder drive motor | Linear motor | China |
Positioning screw, guide rail | HIWIN | China (Taiwan) |
CCD Camera | MKC-D130U | MKC Custom |
Lens | MKC-MF150EX | MKC Custom |
Electric pressure proportioning valve | SMC | Japan |
