HXL-YX-1312Z
Outline
1. This equipment is TP, black and white LCD, TFT, 3D lens high-precision glass substrate cutting special equipment, this equipment has a high degree of automation, with automatic CCD alignment, automatic cutting, automatic finding cutting zero and adjust the cutting depth according to the setting; The cutting motion is stable, the vibration is small, the speed is high; Can achieve square, rectangular, circular, iregular graphics cutting. The equipment adopts industrial computer as the main control system, which has strong anti-interference ability and low failure rate.
2. Visual automatic alignment system, automatic tool depth (tool adjustment) device,automatically change the pressure of each cutting line according to the setting.
3. The arrangement of the cutting line should fllw:
①The spacing between the cutting lie and the cutting lie should be greater than 2 to 3 times the thickness of the cut glass.
②The Angle between the tangent lines is preferably 90土15 degrees.
③Concave cutting to leave a good glass fragment exit open space, generally need to be .more than 30° open.
④Convex radius thickness below 0.5mm R≥3mm, thickness above 0.5mm R≥5mm,products that meet these conditions will get good results.
4. The cutting position, conditions, MAKE of the alignment and cutting pressure of theglass can be read and saved.
5. Program input: CAD graphics import. The graphics are stored in the computer hard disk,and can be imported through the network cable or USB interface (CAD graphics file data import, the company only calls CAD DXF format files; CAD design software and editing
require user professionals to complete)
Equipment composition
The machine is composed of high precision mechanical workpiece and natural marble,electrical control system, optical system, gas path system and independent software system.
Parameters of single knife special- -shaped glass cutting machine
Name | Model number | Length*width*height |
Single knife special-shaped glass cutting machine | HXL-YX-1312Z | 2500mm*1900mm*1800mm |
Table height | Power | Approximate weight |
900mm±50mm | AC 220V，(Monophase)，50/60Hz，4.5KW | 3.0T |
Technical characteristics of machine
Maximum glass size | Glass thickness | Platform flatness(mm) |
1300*1200mm | 0.15mm-1.1mm(Bonded glass) | ±25μm Cutter head relative to working platform |
Direction(tool holder straightness) | Direction(platform straightness) | Precision of cutting glass |
±15μm | ±15μm | Straight line±0.035 Roundness±0.055(R＞20mm) |
Cutter wheel compression | Scribing direction | Tool wheel lifting and depth control |
Atmospheric pressure | 360-degree rotation of the tool head is controllable | Servo motor, screw |
Tool head rotation | Pressure adjustment mode | Tool origin detection |
Servo motor | Voltage proportional valve | Auto |
X- Feed drive | Y-axis feed drive | X- Maximum travel |
Linear motor | Linear motor | Maximum dimensions of the same platform (mm) |
Z-axis feed drive | Positioning device | Maximum travel for optical positioning |
Servo motor | Auto | Maximum dimensions of the same platform(mm) |
Job positioning mode | Data import mode | Power source |
Optical automatic alignment | CAD direct import | AC 220V，(Monophase)，50/60Hz，4.5KW |
Characteristics and origin of key components
Air cylinder | SMC | Japan |
Control computer | Industrial computer | China |
The tool head drives the motor | Servo motor | Japan |
Y platform, X tool holder drive motor | Linear motor | China |
Positioning screw, guide rail | HIWIN | China (Taiwan) |
CCD Camera | MKC-D130U | MKC Custom |
Lens | MKC-MF150EX | MKC Custom |
Electric pressure proportioning valve | SMC | Japan |
